Zexon tech CCTV System Installation Guide

Zexon tech Surveillance Training

Zexon tech CCTV System Installation Guide

After becoming familiar with the instruments and equipment installed in the installation of zexon technology CCTV cameras to explain a simple way to customize your pay.
However, before training, I should point out that I had assumed that the reader has a basic level of technical information about electric wiring and be able to work with simple tools. Otherwise responsible for any damage to your equipment is your responsibility.
Plan: The first step to start a map or plan of the system. When specifying the location of the camera should note several things. Install the camera in low-light environments, it is not recommended. If you just want a night vision camera for use in a dark environment must know where the cameras will be black and white image of a dark environment. Never the camera directly towards the sun or bright lights do not install.
It's not easy to choose the right location for mounting the camera on its side after Ngzryd indifferent. In light of the position and distance of the object position in the image is also very important. When buying contact lenses (if your Zexon camera does not have a fixed lens), you will find various types of lenses. When choosing the location and distance of the light from the lens to the object and note the focal length you choose. In a small area (approximately 50 m) using a 3.6 lens would be suitable. The further away the object should be more focal length lens. The selection of appropriate lens is not easy and will require some experience. Another way to do this is to use variable focus lens, focus range of the lens selection is limited but so comfortable you will be.
By selecting strategically important locations for Zexon tech camera installation you will be able to reduce the number of cameras required for a stable environment. When installing the images do not overlap and install cameras so that each camera did not cover that will cover the entire environment. If a security camera is also important to install cameras so that each camera will usually be an additional camera and the camera is no longer supported. Another important point to draw attention to the placement of the cameras cable is installed in the Zexon ip camera.
Wiring: Wiring is Zmanbrtryn the installation of surveillance cameras. Must be wired in different parts of the application that will use the least amount of wire and wire length does not exceed the limit of standard image signals will be weakened. Never wire transfer video signals from the wires above the cross and a minimum distance of 12 cm in this case do not follow. Each camera cable length should not be more than 400 meters of high quality cables also try to use the images.
Another point is also important, for example, try the wiring when installing Zexon Network Camera CCTV cameras installed at the site is always some extra wires for possible displacements leave. Try to avoid feeding separate cameras. 220 volt power supply to the camera can be used with any camera and use a separate adapter.
or adapter of the camera with a central feed. Each camera feeds from one location to install a separate UPS for the camera in the future you will.
Zexon Camera Placement: Placement camera mounted on the base and screw it to the wall or ceiling. Dowels at the camera to a wall or ceiling, note that the camera is quite firmly in place and the screws and dowels feel you are much greater a small camera to use.
When specifying the location for drilling the camera note. The cameras have a DC power input polarity must note the camera. BNC jack cable to connect the camera to use. BNC jack plug do not think it is very hard to explain why I do it regardless, but please let me know if you think I will add it was necessary to.
Connect BNC cameras will be able to see the picture (if you have not done so well the previous steps). If the camera did not see the Troubleshooting section.
The following table shows you the operation of the camera:

• Data collection (eg, site visits, and the number of cameras required)
• Specify the type of camera
• Specify the location of the control center (due to security considerations and possible wiring etc)
• The feeding system cameras (central or individual)
• Preparing for passage of cables (ceiling, floor, duct, etc.)
• Run cabling
• Correction and wiring details
• Trim and connect the system to display and record details
• Images and camera settings
• The installation of ZEXON tech cameras